ZEUS SUB-OHM Tank - Geekvape - ADV Kit Expansion and Original Parts Sizes | Inked ATTY
ZEUS SUB-OHM TANK
----
Original Part Sizes
Original Glass Size:
22mm Length * 23mm Inner Diameter
Gasket Sizes for Original Glass:
20mm*1.5mm O-ring and 20mm*1mm O-Ring
Drip Tip Size:
12.5mm Socket
-----
ADV KIT 10ML
"EXPANSION KIT"
PART SIZES
The Zeus Sub-Ohm Tank has TWO Versions
that can only be distinguished by checking the bottom of the tank. There is a Tapered Bottom Version and a Flat Bottom Version. Check the Photo below for an example.
ADV Metal Adapter Sizes - BOTH Versions:
TOP 34*24mm &
BOTTOM 34*24mm
Under Adapter Gaskets for Tapered Bottom Version:
TOP 20*1.8mm O-Ring
MIDDLE CHIMNEY 20*1.5mm O-Ring
BOTTOM 20*2.0mm O-Ring
ADV Quartz Glass Size for Tapered Bottom Version:
33*30*18mm Quartz
Under Adapter Gaskets for Flat Bottom Version:
TOP 20*2.0mm O-Ring
MIDDLE CHIMNEY 20*1.8mm O-Ring
BOTTOM 20*2.0mm O-Ring
ADV Quartz Glass Size for Flat Bottom Version:
33*30*17mm Quartz
Gasket Size for ADV Expansion Size Quartz - BOTH Versions:
32mm L-Ring Gasket
Install Notes:
There are Two versions of the Zeus Sub-Ohm Tank. One has a Flat Bottom and the other has a Tapered Bottom.
There are two ADV Kit versions on the website for this reason.
To install the ADV Kit, replace the O-rings listed below "before installing the two adapters and the larger quartz glass piece".
Replace the TOP O-ring on both versions with the size above.
---------------------
The Bottom Original 20*2.0mm O-ring is the same size as needed for the ADV Kit on BOTH Versions. No changes are needed.
----------------------
For the Zeus "FLAT BOTTOM" Version The Groove above the threading is very narrow. The best option is to install the thin 18*1.0mm O-ring to the threading.
For the Zeus "Tapered Bottom" version, this is not necessary, but it can be used for extra protection from leaking.
---------------
For the Zeus "Tapered Bottom Version", install the 20*1.5mm "Middle Chimney" O-ring to the slot above the threading in the photo below.
For the Zeus "Flat Bottom", The 20*1.8mm Middle Chimney O-ring is Optional. If you wish to still install the O-ring to this version, you must gently twist and wiggle the Bottom Metal ADV Adapter onto the O-ring.
--------------------------------------------
After the O-rings are swapped, you can then install the two metal adapters and the larger quartz expansion glass.